• 082133272164
  • cro.jogjatraining@gmail.com
  • Jl. Kapten Haryadi No. 74, RT.02/ 23, Ngentak, Sinduharjo

TRAINING ROTATING MACHINERY EQUIPMENT SPECIFICATION

TRAINING ROTATING MACHINERY EQUIPMENT SPECIFICATION

TRAINING ROTATING MACHINERY EQUIPMENT SPECIFICATION

  training untuk mekanikal

TRAINING ROTATING MACHINERY EQUIPMENT SPECIFICATION

CORSE OVERVIEW

This course is designed to give participants the practical skills to conduct an installation and alignment of rotating machinery in accordance with best industry practice. On completion, participants will be able to correctly install rotating machinery; conduct precision measurements (dial indicators and laser alignment); identify symptoms of misalignment; understand precision standards; undertake appropriate calculations and conduct acceptance testing and commissioning of rotating equipment. This course is applicable to a wide range of industries and is designed for those involved in the operation and maintenance of fixed plant and machinery.

OBJECTIVES

  • Apply practical techniques for troubleshooting rotating machinery
  • Prevent failures from occurring
  • Understand the selection procedures used to select the correct industrial gearbox
  • Troubleshoot industrial gearboxes using failure analysis
  • Select the correct lubrication to ensure maximum life expectancy

WHO SHOULD ATTEND

The course is directed at the process engineer who is responsible for the design, specification or operation of some or all of the equipment covered

 

COURSE OUTLINE

  1. Machinery Health And Reliability Excellence – Introduction
  2. Plant And Machinery Downtime Costs
  3. Machinery Risk Management
  4. Variation, Defects And Failures
  5. Machinery Design Issues
  6. Rotating Machinery Parts Failure
  7. Rotating Machinery Reliability
  8. Industrial Gearboxes
  • Coupling Machinery Alignment Overview
  • Selecting the proper Lubricant
  1. Precision Measurement for Gearing

  2. Selection Of The Correct Type Of Gearbox

  3. Mechanical Equipment And Machinery Standards

  4. Condition Monitoring Methods For Rotating Machinery

  5. Vibration Analysis

  6. Tribiology And Lubrication Analysis

  7. Rotating Equipment Non-Destructive Testing

  8. Process Containment Seals

  9. Strength Of Materials For Shafts And Rotors

  10. Risk Reduction Strategies In Rotating Machinery Design and Operation

 

INSTRUCTOR

Ir. Ating Sudradjat, MT

Instructor is a graduate of Masters in Industrial Engineering ITB. And now, he devotes their practical experiences in Bandung State Polytechnic. He has experience as Chief Thehnician for more than 5 years in his get for working at PT. Pamindo Three, Jakarta. He also briefly served as Technical Manager in Private Firms. His experience as practitioners and academics makes him become a successful trainer in the field of machinery.

Until this moment he became a consultant in several state-owned and private enterprises National

Jadwal Pelatihan Jogja Media Training 2021 :

5-7 Januari 2021 | 12-14 Januari 2021 | 26-28 Januari 2021

2-4 Februari 2021 | 16-18 Februari 2021 | 23-25 Februari 2021

2-4 Maret 2021 | 16-18 Maret 2021

6-8 April 2021 | 13-15 April 2021 | 27-29 April 2021

4-6 Mei 2021 | 18-20 Mei 2021

2-4 Juni 2021 | 15-17 Juni 2021

6-8 Juli 2021 | 27-29 Juli 2021

10-12 Agustus 2021 | 24-26 Agustus 2021

14-16 September 2021 | 22-24 September | 28-30 September 2021

12-14 Oktober 2021 | 26-28 Oktober 2021

2-4 November 2021 | 16-18 November 2021 | 23-25 November 2021

7-9 Desember 2021 | 14-16 Desember 2021 | 21-23 Desember 2021 | 28-30 Desember 2021

 

Jadwal Training Jogja Media Training 2022 :

4-6 Januari 2022 | 11-13 Januari 2022 | 17-19 Januari 2022 | 25-27 Januari 2022

2-4 Februari 2022 | 8-10 Februari 2022 | 15-17 Februari 2022 | 15-17 Februari 2022

2-4 Maret 2022 | 9-11 Maret 2022 | 15-17 Maret 2022 | 22-24 Maret 2022 | 29-31 Maret 2022

5-7 April 2022 | 12-14 April 2022 | 18-20 April 2022

9-11 Mei 2022 | 17-19 Mei 2022 | 23-25 Mei 2022

7-9 Juni 2022 | 14-16 Juni 2022 | 20-22 Juni 2022 | 28-30 Juni 2022

4-6 Juli 2022 | 12-14 Juli 2022 | 19-21 Juli 2022 | 25-27 Juli 2022

2-4 Agustus 2022 | 8-10 Agustus 2022 | 23-25 Agustus 2022

5-7 September 2022 | 13-15 September 2022 | 20-22 September 2022 | 26-28 September 2022

4-6 Oktober 2022 | 11-13 Oktober 2022 | 18-20 Oktober 2022

7-9 November 2022 | 15-17 November 2022 | 28-30 November 2022

6-8 Desember 2022 | 12-14 Desember 2022 | 19-21 Desember 2022 | 27-29 Desember 2022

 

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Lokasi Pelatihan :

  • Yogyakarta, Hotel Dafam Malioboro
  • Jakarta, Hotel Amaris Tendean
  • Bandung, Hotel Golden Flower
  • Bali, Hotel Ibis Kuta
  • Online Daring, Zoom, Google Meet, Teamlink

Investasi Pelatihan Tahun 2021 – 2022 ini :

  • Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
  • Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Training :

  1. FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
  2. Module / Handout
  3. FREE Flashdisk
  4. Sertifikat
  5. FREE Bag or bagpackers (Tas Training)
  6. Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  7. 2xCoffe Break & 1 Lunch, Dinner
  8. FREE Souvenir Exclusive
  9. Training room full AC and Multimedia
Tanyakan pada kami ?

Kami di sini untuk membantu Anda! Jangan ragu untuk menanyakan apapun kepada kami. Klik di bawah untuk memulai obrolan.

Marketing

Hanif Dewi

Online

Hanif Dewi

Hai, ada yang bisa kami bantu ? 00.00