PELATIHAN Pemutus Tegangan Menengah dan Kontaktor

TRAINING Pemutus Tegangan Menengah dan Kontaktor

PELATIHAN Pemutus Tegangan Menengah dan Kontaktor

Deskripsi PELATIHAN Pemutus Tegangan Menengah dan Kontaktor :

PELATIHAN Pemutus Tegangan Menengah dan KontaktorIn an electric power system, switchgear is the combination of electrical disconnect switches, fuses or circuit breakers used to control, protect and isolate electrical equipment. Switchgear is used both to de-energize equipment to allow work to be done and to clear faults downstream. This type of equipment is important because it is directly linked to the reliability of the electricity supply.

Typically switchgear in substations is located on both the high voltage and the low voltage side of large power transformers. The switchgear on the low voltage side of the transformers may be located in a building, with medium-voltage circuit breakers for distribution circuits, along with metering, control, and protection equipment. For industrial applications, a transformer and switchgear line-up may be combined in one housing, called a unitized substation or USS.

This course is designed for technicians and engineers who are responsible for maintenance of medium voltage air / vacuum circuit breakers and contactors (Magne-Blast, Power/VAC and Limit amp equipment). Two-thirds of the class is dedicated to hands-on laboratory work.

Materi PELATIHAN Pemutus Tegangan Menengah dan Kontaktor :

Magne-Blast circuit breakers
* Drawings
* Switchgear protective relays
* Ml-13 operating mechanism
* Adjustments and maintenance

Power/VAC circuit breakers
* Drawings
* Ml-17 operating mechanism
* Ml-18 operating mechanism
* Adjustments and maintenance

Limit amp motor controllers
* Drawings
* Limit amp air-break contactors
* Limit amp vacuum contactors
* Adjustments and maintenance

Metode PELATIHAN Pemutus Tegangan Menengah dan Kontaktor :

* Presentation
* Discussion
* Case Study
* Evaluation
* Practise

Peserta PELATIHAN Pemutus Tegangan Menengah dan Kontaktor :

Engineer, maintenance, operator, supervisor.

Instructor

* Ir. Teguh Santosa
* Tito Yuwono, ST, M.Eng.

 

Jadwal Pelatihan Jogja Media Training Tahun2019 :

  • 8-10 Januari 2019
  • 6-8 Februari 2019
  • 19-21 Februari 2019
  • 4-6 Maret 2019
  • 19-21 Maret 2019
  • 16-18 Maret 2019
  • 6-8 Mei 2019
  • 18-20 Juni 2019
  • 9-11 Juli 2019
  • 13-15 Agustus 2019
  • 10-12 September 2019
  • 8-10 Oktober 2019
  • 5-7 November 2019
  • 10 – 12 Desember 2019
  • 23-24 Desember 2019

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Lokasi Pelatihan :

  • Yogyakarta, Hotel Dafam Malioboro (6.000.000 IDR / participant)
  • Jakarta, Hotel Amaris Tendean (6.500.000 IDR / participant)
  • Bandung, Hotel Golden Flower (6.500.000 IDR / participant)
  • Bali, Hotel Ibis Kuta (7.500.000 IDR / participant)

Investasi Pelatihan Tahun 2019 ini :

  • Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
  • Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Training :

  1. FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
  2. Module / Handout
  3. FREE Flashdisk
  4. Sertifikat
  5. FREE Bag or bagpackers (Tas Training)
  6. Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  7. 2xCoffe Break & 1 Lunch, Dinner
  8. FREE Souvenir Exclusive
  9. Training room full AC and Multimedia

 

Jogja Training

Jogja Training adalah portal informasi training di yogyakarta.