“CONTROL VALVES AND ACTUATORS: Selection, Calculations, Sizing, Applications, Operation, Diagnostic Testing, Troubleshooting, and Maintenance”



CONTROL VALVES AND ACTUATORS: Selection, Calculations, Sizing, Applications, Operation, Diagnostic Testing, Troubleshooting, and Maintenance” 

DESKRIPSI
Extensive course materials provided contained useful information about valves/sizing and selection both theoretical and practical. You will gain a practical understanding of control valves, actuators, and positioner designs and their applications. The course also provides methods that can be used to identify specific valve problems and arrive at acceptable solutions within engineering tolerance. 
 
TUJUAN
  1. Compare various types of final control elements
  2. Understand a typical valve operation in a control loop
  3. Differentiate between various types of valves and the benefits of each
  4. Compare rising stem to rotary style valves
  5. Analyze a control system to determine control valve needs
  6. Use ISA standards for control valve specification and selection
  7. Size valves for any flow condition likely to be found in a process plant
  8. Evaluate and select actuators for specific applications
  9. Specify appropriate auxiliaries including positioners and I/P transducers
  10. Design control valve installations that are safe and trouble-free
Materi :
 
1.    Introduction:
  • Valve in Loop,
  • Actuator,
  • Positioner
2.    Basic Valve Types:
  • Globe Valves,
  • Ball Valves,
  • Plug Valves,
  • Butterfly Valves
3.    Actuators:
  • Spring/Diaphragm,
  • Piston,
  • Vane,
  • Scotch-Yoke,
  • R & P
4.    Comparison:
  • Rising Stem,
  • Rotary Stem,
  • Accessories,
  • Positioner,
  • I/P Converters
5.    Valve Performance:
  • Gain,
  • Time,
  • Trim,
  • Special Needs
6.    Flashing/Cavitation & Noise:
  • Cause/Effect,
  • Prevention,
  • OSHA,
  • Source and Abatement
7.    Installation:
  • Performance, Safety and Others
8.    Valve Sizing:
  • Valve sizing calculation Manual,
  • Valve Sizing calculation Computer
9.    Specification and Selection:
  • Process Requirements,
  • Other Considerations
10. Maintenance and Troubleshooting Considerations:
  • Special Requirements,
  • Diagnostic Tools
11. Smart Valves:
  • Available Designs,
  • Applications in Industry
12. Test valves to evaluate performance factors
13. Size valves manually and with software
14. Specify valves, actuators, and auxiliaries for specific applications
15. Evaluate operation of valves with pneumatic actuators and positioners
16. Smart valve/positioner operation demonstration 
 
Peserta
This Intensive program covering the educational needs of Instrumentation and Control Engineers & Technicians, Mechanical Engineers & Technicians, Projects Engineers, Operation Engineers, Process and Utility Supervisors, and Technical Supervisory personnel involved in Sizing, Selecting, and Applying Process Control Valves. No specific prerequisite training or experience required for registration
 
 
Instruktur
Dr. Eng. Deendarlianto, & Team


Jadwal Training Tahun 2017

 

09 – 11 Januari 2017

21 – 23 Februari 2017

29 – 31 Maret 2017

11 – 13 April 2017

08 – 10 Mei 2017

21 – 23 Mei 2017

19 – 21 Juni 2017

18 – 20 Juli 2017

08 – 10 Agustus 2017

24 – 26 September 2017

16 – 18 Oktober 2017

19 – 21 November 2017

10 – 12 Desember 2017

*Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Lokasi Pelatihan:
•    Yogyakarta, Hotel Dafam Malioboro (6.000.000 IDR / participant)
•    Jakarta, Hotel Amaris Tendean (6.500.000 IDR / participant)
•    Bandung, Hotel Golden Flower (6.500.000 IDR / participant)
•    Bali, Hotel Ibis Kuta (7.500.000 IDR / participant)
•    Surabaya, Hotel Amaris(6.00.000 IDR / participant)
•    Lombok, Hotel Jayakarta(7.500.000 IDR / participant)

Investasi Pelatihan tahun 2017 ini :
•    Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
•    Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Info lebih lanjut :

Fitri

Mobile Phone : 0823 2208 6900 / 0857 2689 0879

Email : info@jogja-training.com

🙂

Jogja Training

Jogja Training adalah portal informasi training di yogyakarta.

Tinggalkan Balasan